Woo-Hoo! FO Friday!

I actually have some knitting FOs to share today. All are knitted from my very own handspun. Here are pictures and descriptions.

Two hats knitted from the Andraste color way from Into The Whirled.

Two hats knitted from the Andraste color way from Into The Whirled.

On the left is the Andraste Turns A Square hat, which is Jared Flood’s Turn a Square pattern, a simple but fun beanie that I enjoy knitting. The pattern is written for using two colors of yarn, but it works really well with self-striping yarn, and you don’t end up with color jogs.

On the right is my A Head for Andraste hat, which is the Barley Hat from Tin Can Knits. It was a lot of fun to knit. I understand why it is such a popular pattern.

The hat and mitts below were knitted from yarn I spun using Bee Mice Elf fiber in the Fall 2014 Club colorway, which I call Rustle.

DSC06209_2

Rustling Leaves Slouchy Hat and Braided Cable Mitts were made to go together.

I didn’t use a pattern for the hat, and the pattern for the mitts is one of my own devising.

I had a lot of the “Rustle” yarn, about 8 ounces total, so I made this set of matching mitts and hat, too.

The mitts are the Braided Mitts by Tara Johnson (free download on Ravelry) which I modified for a better look and fit. I then “designed” the hat myself using the same cable as in the Braided Mitts pattern.

There are also two pairs of mitts knitted from Andraste, but I’m not quite ready to share those with you yet.

I have gotten a lot of pleasure out of Andraste and “Rustle.” First, I spun them up into beautiful yarn, then I knitted that yarn into lovely and useful articles of clothing. What comes next is the pleasure of wearing and/or gifting these handspun handknits.

HAPPY HALLOWEEN!

👻🎃💀👻🎃💀👻🎃💀👻🎃💀👻🎃💀👻🎃💀👻🎃💀👻🎃💀👻🎃💀👻🎃💀👻🎃💀

Another Finished Object Friday

I still have no knitting to report. I’ve added a few rows to each of the socks I have OTN, but nothing substantial. However, the spinning keeps, um, spinning along.

I started with this lovely Corriedale top from Into The Whirled in a colorway called Mud Bogs & Moonshine…

and ended with 8 ounces and just under 1000 yards of this lovely fingering weight 2-ply.

I spun one bump end to end on one bobbin. The second bump was split vertically (lengthwise) 12 times and spun the strips end to end keeping the colors in the same sequence. Then I plied the two singles together to make this gorgeous fractal 2-ply. I’m thinking scarf, but I haven’t decided for sure yet. The spinning was done in double drive on my Matchless at a ratio of 15.5:1; the plying was done in flyer lead (Scotch tension) at a ratio of 12.5:1. My Ravelry project page is here.

And there’s more! I also completed this braid of Shetland wool from the Spunky Eclectic Club Remix.

The colorway is State Park. it reminds me of a meadow in Spring, with all the flowers in bloom.

I made a 3-ply DK weight yarn, about 240 yards and 4 ounces.

I stripped the braid vertically into thirds as evenly as I could, then spun the strips end to end on separate bobbins. I was hoping that the colors would line up in at least some places, and they did! I love how the colors blended. This yarn will probably become either a hat or some fingerless mitts.

This was the very first project I spun on my Matchless. I used double drive and a ratio of 15.5:1. The plying was done on my Ladybug in flyer lead using a ratio of 12.5:1.

My current spinning project has been a pretty slow go because I am spinning up 8 ounces of BFL from Spunky Eclectic to make a lace weight 2-ply yarn.

This is the nicest BFL I have ever spun.

The ratio I’m using is 19.5:1, and spinning such thin yarn really takes a lot of time. But I am enjoying it a lot, and I don’t feel guilty about binge-watching Boardwalk Empire because I’m spinning while I watch.

This is the first bump/bobbin, which I finished several days ago. The second bobbin is now nearly finished.

I hope yinz have a great weekend. It’s supposed to get hot again here, but we are ready. Our A/C, which went on the fritz a couple of weeks ago, has been replaced, so hot and humid doesn’t scare me any more. 🙂

 

Handspun FO Friday

I don’t have any knitted finished objects to share, but I do have some handspun.

I finished the second bump of Into The Whirled Great Minds, which is a superwash Targhee wool. The fiber went from this

Aren’t these colors gorgeous together?

to this.

DSC05694

I spun the fiber end to end, then chain plied it to get a worsted-weight yarn.

I had divided the first bump in half vertically (lengthwise) and spun it up into two 2-oz skeins that are destined to become fingerless mitts, so I spun the second bump end-to-end to make a skein for a matching hat.

DSC05697

The skein on the left is for a hat. The two on the right are for the fingerless mitts. I think it will make a nice set, don’t you?

I also finished a Loop Bullseye Bump that I spun end to end and then chain plied. It hasn’t told me yet what it wants to be when it grows up. 🙂

DSC05688

This colorway is called Pur-plexed, and it is a purple-lover’s dream.

Here are my two newest creations side by side.

DSC05684

The skeins are resting on the treadles of my Ashford Traveller. My Travvy is currently being stored in my bedroom while the house renovations are ongoing. I haven’t spun on her for over two months now, and I miss her. I think I might bring her back downstairs. She’s light, so it’s easy to carry her back upstairs if I need to.

It is amazing how differently different fibers behave, even when spun and plied the same way on the same spinning wheel. The superwash Targhee became a very squishy yarn that poofed up a lot after it was washed. It has a lot of bounce to it. The Loop bump is mostly Merino wool, and it didn’t poof up as much as the Targhee. It, too, is pretty squishy, but it doesn’t have as much bounce as the Targhee.

Both skeins were wound on the same niddy noddy, but when they came off, you can see that the Loop skein was considerably longer than the ITW skein. That’s because the Targhee yarn is stretchier than Merino yarn.

DSC05685_2

That’s all for this FO Friday. I hope you have a great friday.

FO Happy Dance!

It’s been a while since I did a Finished Object Friday blog entry. Is it like riding a bike?

Let’s start with this lovely skein of chain-plied Falkland from Bee Mice Elf. The colorway is Winter 2015 from the fiber club.

Spun in double drive, chain plied in Irish tension on my Ladybug.

I spun this using a technique I learned from Felicia Lo’s Craftsy class, Spinning Dyed Fibers. I split the braid lengthwise repeatedly into thin strips, then spun them end to end, keeping the colors in the same sequence, and then I chain plied the singles. This creates a striping yarn with shorter color repeats. As you can see from the picture, there is a little more color mixing than you normally see in chain-plied handspun. This yarn is destined to become fingerless mitts. I have another bump of this colorway, which I spun using a different technique, and which will become a matching hat, but the skein isn’t quite finished yet, so no picture yet. Sorry.

My other FO is a skein spun from Masham, dyed by Spunky Eclectic in a colorway called Verdigris.

Another chain-plied yarn spun in double drive and plied in Irish tension on my Ladybug.

I spun this using a “fractal” technique described by Benjamin Krudwig on the Schacht Spindle Blog. It’s quite different from the standard fractal spin because it keeps the colors separate but causes the color repeats to become progressively shorter. With the standard fractal spin, which is a 2-ply, the colors are blended in a way that results in a subtle striping effect.

I think of all the colorways I’ve spun since I first picked up a spindle in June of 2012, Verdigris is my very favorite. I also enjoyed spinning the Masham wool. I had never spun it before, but I will most certainly spin it again. It’s very similar to Shetland and would not be next-to-skin soft for many people. But I think to would make a great cowl or fingerless mitts or socks.

I also have another bump of Verdigris which has also been spun and plied, but quite differently from Skein #1. When it’s finished, I’ll photograph the two skeins side by side so that you can see just how different they look. You might find it hard to believe they were spun from the same colorway.

Does This Count As Finished?

Yes, it’s FO Friday, and I’m posting this even though it isn’t technically finished.

I took this lovely braid of BFL from Turtlepurl,

Boys Have Cooties is the name of this colorway.

split it “fractally” and spun it into singles onto two bobbin on my Ashford Traveller in DD,

A bobbin full of Boys Have Cooties

A bobbin full of Boys Have Cooties

 

Both bobbins on the kate

Both bobbins on the kate

plied it on my Travvy in ST into a 2-ply yarn,

Plying in progress

Plying in progress

and ended up with this lovely light-fingering weight, 2-ply yarn.

Boys Have Cooties straight off the niddy noddy

Boys Have Cooties straight off the niddy noddy

Blue and green make pretty. 🙂

I haven’t set the twist yet because I ran out of wool wash. I could use a little dish soap or shampoo, but that would require rinsing. And I’m too lazy for that. I’ll just wait until the Eucalan I ordered arrives to finish the yarn.

Visit Tami’s FO Friday to see more lovely hand-crafted stuff.

 

The Syncopated Alpaca Socks

It’s another Finished Object Friday, and although the Tour de Fleece is in full swing, the FO I am sharing with you today is not a spinning or plying project. It’s a pair of socks.

I call these socks The Syncopated Alpaca Socks because they are my take on Mary Henninger’s Syncopation Socks and are knitted in a scrumptious alpaca yarn from Berroco, Ultra Alpaca Fine. There was no color number or name on the label, so I have no idea what the color is called. I only know that my pictures don’t do it justice.

The Syncopated Alpaca Socks in all their glory!

The original Syncopation Socks are knitted toe-up with a gusset heel. I knitted mine cuff-down with a short row heel and finished them off with a round toe.

For the heel, I gave the Fish Lips Kiss Heel a try. I didn’t do all the measuring, nor did I make the cardboard cut-out because it simply didn’t seem necessary. Since I was knitting the socks cuff down, I simply started the heel when the leg of the sock was the length I wanted it to be. The FLKH is knitted with an inch of plain knitting on the heel stitches of the sock while maintaining the patterning on the instep stitches before beginning the short rows. This is a matter of aesthetics and is something I have done in the past when knitting my usual short-row heels.

The FLKH uses a method for making short rows that doesn’t involve wrapping stitches. Instead, you manipulate stitches from the row below the working stitch, which gives you a pair of stitches that are eventually knitted or purled together. These are called “twin stitches,” and this method of making short rows is sometimes called shadow wrap or shadow twin short rows. When all the decrease and increase rows have been worked, you end up with a very nicely-shaped and well-fitting heel. Sadly, the line of short row stitches isn’t very attractive.

My Fish Lips Kiss Heel close up.

This heel design really does fit better than any other short-row heel I have tried. I normally knit short-row heels on 60% of the stitches on my needles in order to accommodate my high instep. However, I worked this heel on just 50% of the stitches, and it fits me better than any heel I have ever tried. I think the secret is that the way the short rows are worked, you end up with an extra round between the decrease rows and the increase rows. This creates a more rounded heel pocket and hence a better fit.

Although I really don’t like the appearance of the short rows themselves, the fantastic fit more than makes up for the ugly. This is definitely my new go-to short row heel. I’ll take fit over beauty anytime when it comes to my feet. 🙂

Fractal Friday

It’s been a while since I posted a finished object on Finished Object Friday, so I’m pretty happy to have something to post today.

I already told yinz about the fractal spin challenge I participated in on the Schacht Spinners group on Ravelry in a previous blog post.

Here are the final results.

The singles spun on two bobbins on my Schacht Ladybug in double drive

The singles plied together. I couldn’t quite fit it all onto one bobbin. I plied on my Ladybug in Scotch tension.

The 2-ply yarn straight off the niddy noddy

The finished skein. Honey Bear likes it. The silk gives the yarn a nice sheen, and the BFL gives it a nice halo.

The yarn is very fine.

My finished yarn is over 1300 yards in 115 grams, which is very fine lace weight. Overall, I’m very pleased with this spin. If I could do one thing over again, I would have started spinning the singles from the dark pink end instead of the green end so that when I started plying, I would have started with a solid green stripe. But all in all, this fractal spin was a rousing success.